Toe Micro™ Clamps
This cam action fixture clamp provides positive down force while using very little space on the fixture. Workpieces can be clamped in series by using the back surface of a clamp to locate the next workpiece. The hardened steel clamping element has both a smooth surface for machined workpieces and a serrated clamping surface for rougher work. The height of the clamp can be adjusted by milling the slot deeper in the fixture plate.
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
CAD Download Link |
|
|
| 1.70 | .75 | .50 | 1.00 | .090 | .75 | .25 | .62 | .845 | | .050 | 5/16-18 x 3/4 LH | 20.8 | 2000 |
| 2.12 | 1.00 | .45 | 1.32 | .110 | 1.00 | .38 | .62 | .960 | | .100 | 3/8-16 x 3/4 LH | 65.0 | 4000 |
| 2.95 | 1.50 | .99 | 2.00 | .130 | 1.50 | .50 | 1.25 | 1.70 | | .100 | 1/2-13 x 1 1/4 SHCS | 100.0 | 6000 |
|
| 43.2 | 19.0 | 12.7 | 25.4 | 2.3 | 19.0 | 6.4 | 15.75 | M10 | 1.6 | M8 | 28.0 | 8900 |
| 54.0 | 25.4 | 11.4 | 33.5 | 2.8 | 25.4 | 9.7 | 15.75 | M12 | 2.0 | M10 | 88.0 | 17800 |
| 75.0 | 38.1 | 25.2 | 50.8 | 3.3 | 38.1 | 12.7 | 2.5 | M16 | | M12 | | |
+ "E" is the distance needed between the front of the clamp base and the workpiece. * "I" is the distance from the tope of the washer to the bottom of the clamp body.
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).